RV Roofs

Rexoseal RV Roof Steps

Click the button below for Full Application Guide

1 Remove all covers of the roof.
2 Premix Rexoclean with water.
3 Spray Rexoclean on the roof while sanding with pole sander then rinse off with water.
4 Use scrub brush on seams and all areas with caulking then rinse with water.
5 Clean the sides of the RV with Rexoclean, to remove the black stains.
6 Take the 3" brush and embed the reinforcing membrane on all the seams and vents. Cut to fit around poles.
7 Apply a generous amount of Rexoseal RV then embed the reinforcing membrane and re-coat.
8 Apply 5 to 6 more coats, as this is the most important part of the system.
9 For the corners cut the membrane 8" long and cut 1 1/2 slits on both sides in order to follow the contour.
10 Apply a generous amount of Rexoseal RV around vents.
11 Apply membrane on the sides, just before the gutter.
12 Once all the seams are finished apply the first coat of Rexoseal RV with the 7" wide brush.
13 Allow the first coat to dry 1 to 24 hours dependant on the temperature and humidity.
14 Apply the second and third coat with a roller.
15 If your busy you can apply the finishing coats 2 to 3 days later. Make sure to mix the Rexoseal RV Sealant before use.
16 Make sure to apply ALL of the Rexoseal RV Sealant. Once finished don't walk on roof for 30 days.
17 Enjoy your brand new waterproofed roof!